Videos
How To Order

Link's
Faq's
Contact

Bearings
Engine Services
Home
We Service Asssociated, Alpha, Axe Rossi, Boss, Collari, Crono, Dynamite, Go Tech, GRP, Hot Bodies, HPI, Hyper, Jammin,JS, JP, Kyosho, LRP, Novarossi, Nova Mega, Nitro Star, Ninja, OS, Ofna Force Precirotate, Picco, Reedy, RB Concepts, Sportwerks, SH, Sirio, Traxxas, Trinity, Team Orion, TOP, Vega, Werks and XTM .21 engines and More!
Copyright  rcrenew 2010 all right reserved. Images can not be used without express written permission
Engines & Accessories
Engine Modding
Hand Tools and clutch tools



RcRenew clutch tool. We designed and manufactured this tool to hold the flywheel so you can tighten the clutch nut with out using pliers that damage and scratch the flywheel. It also installs the top plate and is easier to use than the other tools available  as it has more leverage. This one tool is all u need ! this tool werks on the Ascendancy and Werks 4 shoe V1 and V2  clutch systems.
Part#RCRWKSCTL  $24.99
Tools


Flywheel puller easily removes the flywheel on most .12 thru .35 engines Part# ITFLYP2 
$18.99
Long reach flat head  engine tuning screwdriver . Part# ITFHS1
$9.99
RcRenew Drive pin tool for cvd, universals and dog bone axles. This tool allows you to replace the worn out  3mm pins in your axles. So you just have to replace the pins instead of the whole unit.  Presses the old pin out and the new pin in! Can be clamped in a vise or held with a 3/4" wrench. Then a 1/4" wrench to press out the pins.  Works with SH, associated, Losi, Kyosho, Mugen buggies and truggies and many other vehicles that have replaceable pins. ( Can be used for 2mm pins with 2mm screw sold seperatley below). Part# RCRDPT12
$49.99

Watch video
3x14mm   Hardened  1/8 th scale Axle drive pins  (6)

$5.99
The most common size for  1/8 vehicles. For use with the RcRenew drive pin tool above.

Watch video
Made in the U.S.A
Made in the U.S.A
Business hours M-F 9 to 5 eastern time
News
2mm pin install screw for use  with our 1/8th scale  cvd drive pin tool
This is the install screw to install 2mm drive pins on  1/10 vehicles. For use with the RcRenew drive pin tool above.
$9.99
RcRenew  5th scale Drive pin tool for cvd, universals and dog bone axles. This tool allows you to replace the worn out  4mm or 5mm pins in your axles

So you just have to replace the pins instead of the whole unit.  Presses the old pin out and the new pin in! Can be clamped in a vise or held with a  wrench. Then use another wrench to wrench to press out the pins.  Works with  vehicles that have replaceable pins. .

( select 4mm or 5mm when ordering, but both size install screws are available seperatly if you want both)

Part# RCRDPT125
5TH scale cvd pin tool
1/8 TH  and 1/10th scale cvd pin tool
Made in the U.S.A
Made in the U.S.A
Made in the U.S.A

5TH scale cvd pin tool install screws
5TH scale cvd pins

Replacment pin install screws for 1/5th scale cvd tool  Choose 4mm or 5mm
Pins for 1/5th scale cvd tool pack of (6)
Choose 4mm or 5mm
choose size
choose pin size
choose size

Nitro .21  engine sleeve cylinder removal tool
A must have for your tool box!  Remove your sleeves from your engines without damaging them. Fits most .21 size nitro engines 2 sizes available please check which one you need.
Fits engine with16.2mm to 16.6mm bore
Fits engines Like Novarossi Bonito, virtus etc.. with 15.8mm to 16.1mm bore mm bore

  $69.99
replacement 1/8th scale tool screws
select which screw